About Ampelite

Contact Us
Warranty Request
Product Catalogue

AMPELITE – Residential Roofing – EASYCLICK

EASYCLICK PC Do it yourself Polycarbonate Panels

cost effective commercial roofing
Great range of profiles
Bromine Free - Group 3 Surface Finish
Excellent spanning
Excellent spanning
Excellent spanning
Excellent spanning
Excellent spanning

Rigid structured sheets with an innovative click jointing system with excellent thermal insulation.

EasyClick PC is an ideal option for vertical glazing and roofing around your home. With it’s excellent light transmission, flat attractive appearance, with no condensation. Easyclick PC is an ideal alternative or replacement for profiled roofing with no jointers required.

EasyClick PC is an ideal option for glazing and roofing in Patios, Greenhouses, Carports, Pool Enclosures, Office Partitions and more; EasyClick PC is the perfect product for DIY. Available in 500mm wide panel, EasyClick is perfect to replace the roofing on your tired old pergola. Easily retrofitted to structures designed for profiled sheeting with no additional support required.

Assembly of EasyClick PC is so simple that it can be installed with standard DIY tools. Cut panels to the desired length, screw in place, snap-in next panel and repeat, finish with aluminium U-channel. EasyClick is thermally efficient and offers high light transmission and filters 99% of the harmful UV rays, protecting patio furniture, vehicles, etc. from the harmful effects of the sun.

EASYCLICK 500mm Brochure
Sheeting Information
Installation
BPIR

MAIN BENEFITS

  • Flat attractive appearance
  • Strong and Lightweight
  • No jointers required
  • No condensation
  • UV protection
  • Easy DIY installation over existing framing, no jointers required
  • 500mm cover in 16.0mm thick, available in numerous lengths from 2000mm to 7000mm
  • Available colours Clear, Opal and Dark Grey
  • 1S fire performance

EASYCLICK PC – Sheeting Information

PLANNING

EASYCLICK PC SHEETING INFORMATION

COLOURS WIDTH (mm) THICKNESS
Clear, Opal, Dark Grey500mm16mm

SPANNING CAPACITY (BETWEEN PURLINS)

PROFILE MAX SPAN
500mm panel1500mm
The span between battens and supporters should not exceed the above measurements and have a minimum fall of 5 degrees.

SHEET COVERAGE TABLE: For 500mm panels

1 SHEET 2 SHEETS 3 SHEETS 4 SHEETS 5 SHEETS
500mm1000mm1500mm2000mm2500mm

LIGHT TRANSMISSION

COLOURS EASYCLICK 250mm EASYCLICK 500mm
Clear80%77%
Grey40%10%
Opal50%67%

AMPELITE – EASYCLICK PC

INSTALLATION

Only one side of the EasyClick sheet is UV protected, therefore ensure the sheeting is installed with the correct side facing up. Sheet ribs (flutes) must run vertically with the fall of the roof. Sheeting can be cut to length using a power saw fitted with a fine-tooth blade suitable for plastic. A craft knife can be used for cutting to width.

1. Cut to the required size.
2. Secure the panel onto each batten with a screw. In High Wind areas, an extra fastener may be required.
3. Match the next sheet edges carefully and press them into place with a “click.”
4. Apply a border of EasyClick Aluminium End Cap, in conjunction with a bead of Ampelite, Sealonce Polycarbonate a Sealent.
5. Please ensure the EasyClick End-Cap is installed with the drip edge facing down.

Only use sealants that are 100% compatible with polycarbonate sheeting; suitable sealants are available from Ampelite. The use of incorrect sealants will void warranties. For installation in curved applications, please contact Ampelite.

EASYCLICK 500mm Brochure

Cleaning and Maintenance

Handy tips

EasyClick sheeting is a non-trafficable material. Sheets should be handled with care to avoid damage to the surface and fully support sheeting while cutting.

Recycling and disposal

Polycarbonate sheeting is fully recyclable and can also be disposed of in a land fill.

Cleaning

Use only a soft brush and soapy water – no abrasives. To prevent possible staining, we recommend cleaning whenever bird soil is apparent.