Roomlite Installation, Accessories and Warranty |
Roomlite Installation
Fitting instructions are enclosed with the product. The acrylic dome is factory fitted with a simple, but reliable flashing surround that suits either tiled or steel clad roofs. The 300 mm dome can be installed without the need to cut rafters or battens. Installation of the 400 mm and 500 mm sizes is also simple, but you should seek advice from a qualified person if you decide to make structural changes. The reflective flexible duct is able to dodge around most obstructions and slips over the ceiling diffuser. Models RM400 and RM500 may be vented or non-vented. Professional fitting can be arranged.
|
Flashing and Colours:
The malleable aluminium flashing is easily shaped to suit tile or metal roofs and is available in a range of colours to match roofing.
Roomlite Kit Content:
Pre-assembled Roof Dome/Flashing/Flexible Duct. 2 piece Ceiling Diffuser with Prismatic Lens. (Venting components RM400 and RM500 only)
Light where you need it Kitchens Pantries Living areas Bathrooms Walk-in-Robes Hallways, Nurseries Laundries Bedrooms, Studies En-suites and Toilets Storerooms, Workshops.
Accessories
1.5 Meter long ducting extesion kit is available |
Warranty
Ampelite warrant the product to be free from defects in materials or workmanship for a period of 5 years from date of purchase. The acrylic dome is also covered by warranty for 5 years against damage by hail up to 19 mm in diameter accompanied by winds up to 100 km/hr.
To qualify for protection under this warranty the Roomlite unit must be installed in domestic premises and subjected only to normal domestic usage.
If any components fail within the warranty period and are found defective they will be repaired or replaced at the manufacturer's option. The component must be returned freight pre-paid by the purchaser to the nearest Ampelite Australia Pty. Ltd. state office together with proof of purchase documentation.
Failures caused by incorrect installation, accident, attempted repair, normal wear and tear are not covered by this warranty. The manufacturer is not responsible for removal or re-installation costs, or any consequential damage.
|
|
|
|
